HOW MUCH DOES SOLAR ENERGY SAVE YOU?

Solar Power systems can most definitely save you money. The real question is, how much exactly? Well, that figure is based on a number of factors in which we cover in this section.

Solar power can help you dramatically reduce the running costs of your property. To find out how much money you can save with solar power, there are a number of factors that need to be considered.

  • Your average energy consumption
  • Usage patterns
  • Your feed-in tariff rate
  • The size of the solar power system you install
  • Where you live

Tip: Use our calculator to compare savings on common PV systems

Your average energy consumption

You can easily determine how much electricity you use by looking at the back page of your last power bill. The amount of electricity you consume will be shown in kilowatt hours (kWh). This is the first step in determining how much you can save with solar power as well as which system is right for you.

Typically, larger properties or households with higher energy demands will require a solar power system around the 5kW range or higher.

A 5kW system in Australia generates between 18kW/h – 25kW/h (depending on your region) of solar electricity on average per day. Refer to your bill to see how many kW/h or units you are currently using.

Some regions are limited by the size of the system they can install; to find out more information, contact us.

Usage patterns

Your solar power system will produce electricity during daylight hours, any excess electricity generated is fed back into the grid. Your energy provider will credit you for the export of power and this credit helps offset your power bills.

The clean electricity created by your solar power system is always used in your home before power from the grid. If your home uses more electricity than what your solar power system can provide, it will then source grid power.

To find out how much credit you can earn in your state, ask our team.

Your feed-in tariff rate

Most customers who sign an agreement with their energy provider will be offered a rate of 8c/kWh for the solar power that is fed back into the grid.

It’s best to check with your power company to find out the tariff rates on offer and if you can, it’s recommended that you shop around to secure the best rates. Feed-in tariffs can also vary state-to-state, so make sure you have your figures right, before you start calculating your savings.

The size of the solar power system you install

Larger solar power systems, such as a 5kW unit, will produce significantly more power than a smaller, 2kW system for example.

The size of the solar power system you install has a great impact on the amount of money you save. It’s important to choose a system that is large enough to cover your power usage, lessen your payback period and maximise ROI.

On the other hand, installing a system which is too large will mean you’re exporting a surplus of power back into the grid. Now that feed-in tariffs are lower, you will be selling power back to your energy provider for much less than the costs of your electricity rates.

Finding a system which suits your property size and consumption behaviour is the key to saving money.

Where you live

Australia enjoys the highest solar radiation per square metre of any continent in the world. As a result, there’s plenty of opportunity for us to harness the power of the sun.

Your geographic location will influence the energy production of your solar power system and ultimately, how much you can save. For example, solar power systems installed in Queensland will yield more solar electricity than an equivalent unit installed in Melbourne.

In other words, in one region where solar radiation is stronger you may install a 2kW system, while in a region with less solar radiation, a 3kW unit will be necessary to achieve the same results.

The table below demonstrates what a 3kW system will save on average per annum. The two values indicate the average savings based on 5% and 25% export of electricity.

Annual FIT & offset value based on 3kw System
Location Based on 5% of electricity 
being fed into the grid
Based on 25% of electricity
being fed into the grid
Victoria $866 $750
South Australia $1226 $1162
Queensland $1146 $1060
Western Australia $1128 $1030
New South Wales $1126 $934
ACT $950 $788
Tasmania $866 $750
Northern Territory $1046 $1046
Estimations on annual FIT & Offset values are provided from the Clean Energy Council of Australia.